87 Series Geometris (Plug-in)

Back to Hardware

Our plug in device works in most light-duty and medium-duty vehicles made after 1995. and instantly plugs in to the OBD-II port on your vehicle. This unit can be used for ELD tracking with a Bluetooth connection to the tablet being used for Driver App access. ELD use will require an additional fee per month, per unit. Please contact our Sales Team for pricing details.

To install your 87 Series Geometris units, fit the device into the OBD II port of your vehicle. To locate the OBD II port, consult the User Manual for your vehicle. When installing the device, ensure that the vehicle is outdoors with a clear view of the sky (no metal roofs or overhangs). The device should report within a few minutes of installation. Turning on engine run can help the unit report sooner. If the device has been installed for longer than 1 hour without a response, please contact our Support Team for assistance.

– Y Cable Install

Device Unplugged Notification
To set up the notification, go to the large Settings tab on your screen and select “Users” from the sub-menu option. Select “edit” next to your User name. From this page select the “Alerts” option. Select “edit” for the “Device Unplugged” notification. You can set yourself to receive instant notifications via text, email, or an application message when this occurs. Hit the Update button.

Device is not Reporting (Offline)
If your Plug-In device has not reported in over 1 hour, it is most likely not connected to the mobile network. If the device is in a remote area, then it should regain connection once it re-enters a mobile coverage zone. If the device does not report for an extended period, this could be a result of device malfunction or the device could have come unplugged for some reason.

If you have access to the vehicle we recommend that you check to see if it is still plugged in. If it is, are the green and orange LED’s on? If there are no LED’s on it could mean that a fuse has blown in the vehicle and you could try plugging the device into another vehicle. If the LED’s do not come on when plugged into another vehicle or the orange LED does not stop blinking after a few minutes, please contact Support and we will create a resolution to this delay.

Engine Diagnostic Codes
Plug-in devices will report any vehicles showing active diagnostic codes. To view this information, go to the Maintenance tab on your screen and click “Diagnostics” from the sub-menu. Here you will see any active engine codes listed. After the codes have been cleared from the vehicle, you can see the history in the “History” link on the right hand side of the screen. There is an Engine code alert you can set up in the alerts section to notify you immediately of active codes.